|
Ring Disc Variator Drive for Spinning Machine |
Salient Features
- Improves production by 5-15%
- Works with all types of Ring Spinning Machines
- Spindle speed can be easily varied from 8,000 rpm to 22,000 rpm
- Maintains programmed spindle speed for frequency /voltage variations
- Computer networking facility helps to manage speed/ production effectively
- Low payback period
- Speed Variation can be achieved in 25 different steps based on yarn length
- Speed pattern can be pre - programmed for nine different counts
- Programmable slow speed facility
- Pneumatic cylinder speed control technique helps to start the machine always at minimum speed - so less breakages
- Only one motor required for full speed range
- RS 485 serial port to connect with computer
Systems Configurations
- 2 Sets of Aluminum Alloy variator disc with pneumatic control for actuator assembly
- Variator belt
- Spinpro - 9A Electronic Unit with Sensors
Spinpro - 9A Displays
- Length of the yarn
- Production in Hanks (Shiftwise & Total)
- Spindle speed (rpm)
- Production rate (Mtrs/min)
- Twist per inch (TPI)
- Machine run time in hours
- Down time (Shiftwise & Total)
Technical Specifications
| Parameters | SPINPRO - 9A |
|---|
| Spinpro - 9A supply voltage | 220V AC ± 10% 50 Hz |
| Keyboard | Feather touch membrane type |
| Display | Alphanumeric - 2 lines LCD display |
| Air requirement | Moisture free air with pressure 6 - 7 bars |
|
