Improves production by 5-15%.
Works with all types of Ring Spinning Machines.
Spindle speed can be easily varied from 8,000 rpm to  22,000 rpm.
Maintains programmed spindle speed for frequency /voltage variations.
Computer networking facility helps to manage speed/ production effectively.

Low payback period.
Speed Variation can be achieved in 25 different steps based on yarn length.
Speed pattern can be pre – programmed for nine different counts.
Programmable slow speed facility.
Pneumatic cylinder speed control technique helps to start the machine always at minimum speed – so less breakages.
Only one motor required for full speed range.
RS 485 serial port to connect with computer.

2 Sets of Aluminum  Alloy variator disc with  pneumatic control for 
actuator assembly.
Variator belt.
Spinpro – 5A Electronic Unit with Sensors.

        Spinpro – 5A Displays
 
  Length of the yarn
  Production in Hanks (Shiftwise & Total)
  Spindle speed (rpm)
  Production rate (Mtrs/min)
  Twist per inch (TPI).
  Machine run time in hours
  Down time (Shiftwise & Total)

 


     
Spinpro – 5A supply Voltages 220v AC, ± 10%  50 Hz
Keyboard Feather touch membrane type
Display Alphanumeric – 2 Lines LCD Display.
Air Requirement Moisture free air with pressure 6-7 bars.

INDUS - Strives for continuous product innovation. Product specifications are subject to change without notice.